I began with small 'pinch pot' bowls to try out slips and glazes and to get used to handling much rougher clays. Due to the strong colour of the clay, I soon found that glazes worked best over several coats of white slip, as in these small bowls using the pink clay
And these in the black clay
Time then to move on to making some planters, my intended prime use for these new clays.
small black planter - d~15cm |
large black planter - d~25cm, h~20cm |
large pink planter - d~25cm, h~20cm |
Once again I used flattened coils but did not smooth the outside, instead used a square edged tool to accentuate the steps.
I then decided to experiment with a combination of pink and black clays. I had thought that cracks at the joins might appear due to different contraction of the two clays, but all joins have remained intact at both bisque and stoneware firings.
pink and black bowl - d~18cm |
black and pink bowl - d~16cm |
Whilst playing with my 'new' clays, the new shoots, koru, of my ferns were growing rapidly in the garden, time to make use of them. I decided to make some cylinder vases, pressing the koru into the clay before forming the cylinders. I also made a feature of the joins by making an outward curl of slab at the join. The koru impressions were highlighted with copper oxide and marble green glaze was used inside the vases and on the outside of the curls.